with Partial Extension, Load Capacity up to 780 N
GN 1404 Telescopic Slides
Type
| E | With rubber stop, locking device in back |
Identification no.
| 3 | Fastening using through-holes on external slide and countersunk holes on inner slide |
| l1 | l2 +2/-2 Stroke | l3 | Fs per pair in N at 10,000 cycles | at 100,000 cycles |
|---|---|---|---|---|
| 300 | 205 | 490 | 780 | 600 |
| 350 | 239 | 574 | 630 | 490 |
| 400 | 289 | 674 | 540 | 420 |
| 450 | 339 | 774 | 460 | 360 |
| 500 | 373 | 858 | 540 | 420 |
| 600 | 457 | 1042 | 560 | 430 |
| 700 | 541 | 1226 | 560 | 430 |
Specification
Steel, Zinc plated, blue passivatedZB
Bearings
Roller bearing steel, hardened
Ball cage
Steel, zinc plated
Rubber stop
Plastic / Elastomer
Operating temperature -20 °C to 100 °C
Telescopic Slides - Application Video
Mounting holes to GN 1404
Telescopic Slides - Highlights
Telescopic Slides - General Notes and Overview of Types
Telescopic Slides - Mounting and Technical information
Telescopic Slides - Component Options and Fastening Options
RoHS
On request
Other attachment options
With rubber stop (without locking device)
Other surfaces
With support bracket
With retraction dampening, external
Information
Telescopic slides GN 1404 are installed vertically and in pairs. The stroke reaches ≈ 75 % of the nominal length l1 (partial extension). The rubber stops of type E dampen the impact of the slide in the two end positions and takes on the locking function of the back stop position. This feature is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.
The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach without auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.
see also...
| How to order |
| ||||||||
GN 1404-600-E-3-ZB |
-
-
