with Eccentrical Cam Lever

GN 9190 Side Clamps

Type

E	With serrated clamping jaw
P	With prism clamping jaw

Coding

R	Clamping by clockwise rotation
L	Clamping by anti-clockwise rotation

Show filter

a Slot width	d₁	F_S in kN Max. clamping force	b	d₂	d₃ Min.	Max.	h₁	h₂

10	M 8	3,5	32	8,4	4	26	20	8
12	M 12	7	48	12,5	4	26	38	16
14	M 12	7	48	12,5	4	26	38	16

Filter combination produces no result.

a Slot width	h₃	h₄	h₅	l₁	l₂	l₃	s Clamping stroke

10	40	30	12,6	132	32	50	3
12	62	63	-	190	40	72	4
14	62	40	19,1	190	40	72	4

Filter combination produces no result.

Specification

Clamping mechanisms
Steel

Case-hardened
Blackened

Ball knob DIN 319
Plastic, Duroplast
Black, shiny finish

For slot width a = 10 / 14

Nut for T-slots DIN 508
Socket cap screw DIN 912
Steel, blackened

For slot width a = 12

T-slot bolt DIN 787
Hex nut DIN 934
Steel, blackened

RoHS

Accessory

Slotted Support Blocks GN 9190.3

Information

With side clamps GN 9190, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it against fixed stops and the supporting surface.

The clamping stroke of the clamping jaw results from the swivel movement of the eccentrical cam lever. When the lever is released, the clamping jaw is returned by spring force. The low overall height of the side clamps allow full-surface machining of the workpiece.

Side clamps can be screwed in directly, e.g. in a mounting plate, or fastened to machine tables with T-slots. In addition, they can be mounted in any position perpendicular to the T-slot using the slotted support blocks GN 9190.3, which are available as accessory.

How to order