Threaded Stud Stainless Steel / Foot Plastic

GN 445.5 Leveling Feet

ELESA original design LV.FO-SST Info

Type

A	without nut, without rubber pad
B	with nut, without rubber pad
AG	without nut, with rubber pad
BG	with nut, with rubber pad

Show filter

d₁	d₂	l₁				b	d₃	k₁	k₂	l₂	l₃	l₄	A/F	Ball Ø	Static load in kN (see information)

60	M 8	43	68	-	-	96,5	8,5	50	18	30	14	21	14	14	14
60	M 10	43	68	98	-	96,5	8,5	50	18	30	14	21	14	14	14
60	M 12	43	68	98	-	96,5	8,5	50	18	30	14	21	14	14	14
60	M 14	68	98	148	-	96,5	8,5	50	18	30	14	21	14	14	14
60	M 16	68	108	148	168	96,5	8,5	50	18	30	14	21	16	14	14
80	M 8	43	68	-	-	130	10,5	70	25	31	14	22	14	14	14
80	M 10	43	68	98	-	130	10,5	70	25	31	14	22	14	14	16
80	M 12	43	68	98	-	130	10,5	70	25	31	14	22	14	14	16
80	M 14	68	98	148	-	130	10,5	70	25	31	14	22	14	14	16
80	M 16	68	108	148	168	130	10,5	70	25	31	14	22	16	14	16

Filter combination produces no result.

Specification

Foot
Plastic Technopolymer (Polyamide PA)

Glass fiber reinforced
Black, matte finish
Temperature resistant up to 100 °C

Threaded stud
Stainless steel
AISI 303

Hexagon nut ISO 4032
Stainless steel
AISI 304

Rubber underlay (NBR)
70 Shore A, black

Stainless Steel Characteristics

Plastic Characteristics

Elastomer Characteristics

RoHS

Information

Leveling feet GN 445.5 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.

The values given in the table regarding the static load capacity serve as a guide line only and if these are exceeded serious permanent deformation or breakage of the plastic socket could occur.

The above values have been arrived at by a series of tests whereby a limited number of leveling feet were subjected for a limited time to a vertical static load to the feet.

The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

The fixing holes are closed by a thin plastic layer, which may be easily punctured.

Leveling feet GN 445.5 are supplied assembled, but are removable.