GN 426.6 Stainless Steel Cabinet U-Handles
Type
| A | Mounting from the back (threaded blind bore) |
| B | Mounting from the operator's side |
| d1 | l1 ±0,5 Type A | ±0,3 Type B Threaded bore for mounting stud | d2 | d3 | h1 | h2 | l2 | r ≈ | t1 | t2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 20 | 200 | 200 | M 8 | - | 105 | 68 | 20 | 22 | 15 | - |
| 20 | 300 | 300 | M 8 | - | 105 | 68 | 20 | 22 | 15 | - |
| 28 | 250 | 250 | M 10 | 32 | 128 | 90 | 20 | 32 | - | 17 |
| 28 | 350 | 350 | M 10 | 32 | 128 | 90 | 20 | 32 | - | 17 |
| 28 | 500 | 500 | M 10 | 32 | 128 | 90 | 20 | 32 | - | 17 |
Filter combination produces no result.
Specification
Stainless steel AISI 304
d1 = 20: Solid material
d1 = 28: Tube-Ø 28 x 2
Matte shot-blasted
Threaded bushing /
Mounting stud
Stainless steel AISI 303
Grub screw (type B)
d1= 20: DIN 914-M5-6-NI
d1= 28: DIN 914-M6-8-NI
RoHS
d1 = 20: Solid material
d1 = 28: Tube-Ø 28 x 2
Matte shot-blasted
Threaded bushing /
Mounting stud
Stainless steel AISI 303
Grub screw (type B)
d1= 20: DIN 914-M5-6-NI
d1= 28: DIN 914-M6-8-NI
RoHS
Information
Stainless steel cabinet U-handles GN 426.6 can be mounted from the back (type A) as well as from the operator’s side (type B).
In this case the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw.
Both mounting methods allow the mounting of a pair of handles in opposite position. This method could be used e.g. on doors (double handle). In general, a mounting stud with special length l2 might be required.
Due to the manufacturing process, special designs can be supplied even in relatively small quantities.
| How to order |
| ||||||
GN 426.6-20-300-A |
This could also be interesting...
RoHS compliant:
-
-
Weight:
-
-
PDF not available
