Plastic, for Panels
GN 237.1 Hinges
Original design CFM-TR-G.
Type
| AG | 2x bores for countersunk screws / 1x bore for panels |
| l1 | l2 | d1 | d2 | d3 | h1 | h2 | h3 | h4 ≈ | h5 | h6 | l3 | l4 | m1 ±0,25 | m2 ±0,25 | m3 | m4 | s |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 64 | 40 | 5,5 | 4 | 10,5 | 9 | 5 | 5,5 | 11 | 4,1 | 2 | 14 | 38,5 | 12,5 | 25 | 32,5 | 7,5 | 5,6 |
| 77 | 50 | 6,5 | 6 | 10,5 | 11,5 | 6 | 6,5 | 13 | 4,7 | 2 | 18 | 45 | 15 | 30 | 39,5 | 10,5 | 6,6 |
| 90 | 60 | 6,5 | 8 | 10,5 | 15 | 8 | 8,5 | 17 | 4,7 | 2 | 21 | 51,5 | 18 | 36 | 47,5 | 12,5 | 6,6 |
Filter combination produces no result.
Specification
Plastic (Polyamide PA-HP)
Pin
Stainless steel AISI 303
Step washer
Rubber NBR
Flat washer
Stainless steel
RoHS
- Glass fiber reinforced
- Temperature resistant up to 70 °C
- Black, matte finish
Pin
Stainless steel AISI 303
Step washer
Rubber NBR
- Hardness 70 Shore A
- FDA compliant plastic granulate
Flat washer
Stainless steel
RoHS
Information
Hinges GN 237.1 have a design that makes them perfect for attaching panels, such as of glass or plastic.
For installation, set the centering aid d3 of the hinge against an appropriately-sized hole in the panel. The hinge is attached with a carriage bolt DIN 603, which is fastened on the back side of the panel with a nut, a step washer and a flat washer.
The step washer and flat washer are included.
see also...
| How to order |
| ||||||
GN 237.1-77-50-AG |
RoHS compliant:
-
-
Weight:
-
-
PDF not available
