GN 5862 Load Hooks

Show filter

d₁	Length l	d₂	e	h₁	h₂	h₃	h₄	h₅	k₁	k₂	k₃	k₄	c	s	Tightening torque in Nm	Nominal Load in t

M 12	18	4,8	40	129	116	75	41	49	12	53	25	82	18	36	10	0,63
M 16	24	7,4	46	166	146	97	49	63	16	73	32	105	25	41	30	1,50
M 20	30	9,6	61	215	187	126	61	78	20	95	42	136	30	55	70	2,50
M 24	36	12,1	78	263	227	150	77	96	26	118	52	163	35	70	150	4,00
M 30	45	15,6	95	304	267	174	93	119	30	135	57	189	40	85	225	5,00
M 36	54	19	100	359	310	208	102	137	36	161	68	227	48	90	410	8,00

Filter combination produces no result.

Specification

Hook
Steel 1.6540

High-tensile tempered
100% electro magnetic tensile tested
Powder coated, pink

Safety catch
Steel 1.6541

Forged
High-tensile tempered
100% electro magnetic tensile tested

Bearing case
Steel 1.6541

Forged
High-tensile tempered
100% electro magnetic tensile tested
Zinc plated, blue passivated

Threaded stud
Steel, high-tensile tempered
Finish: Delta Tone

RoHS

On request

Other screw lengths l

Information

Load hooks GN 5862 rotate running in ball bearings. The freely rotating hook allows the bolts to hold loads in any allowed tensile direction.

The rated load carrying capacity listed in the table is shown clearly on bearing case. It applies to the most unfavourable load application of the load types listed opposite.

Load hooks GN 5862 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

The operating instruction contains further guidelines and is included with every load hook (see also at www.ganternorm.com/en/service).