Aluminum
GN 134.7 Locking slide units
Type
| G | with thread |
| R | with indexing plunger |
| D | with spring plunger |
| s1 Square | s2 Square | d1 | d2 Pin -0,05 Bore +0,03/+0,08 | d3 Ball-Ø | k Clamping length | l1 | l2 | m | z Screw locations | Accessory recom. hand lever GN 911 for z l3 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| V 25 | V 25 | M 8 | 5 | 3,5 | 50 | 79,5 | 68 | 33,5 | M8-30 | 63 | 78 |
| V 30 | V 30 | M 8 | 5 | 3,5 | 50 | 79,5 | 68 | 33,5 | M8-30 | 63 | 78 |
| V 40 | V 40 | M 12 | 8 | 6,5 | 76 | 125 | 98 | 55 | M10-50 | 78 | 92 |
| V 50 | V 50 | M 12 | 8 | 6,5 | 76 | 125 | 98 | 55 | M10-50 | 78 | 92 |
Specification
Powder coated
Black, RAL 9005, textured finishSW
Fastening elements / transfer elements
- Socket cap screws DIN 912
- Hex nuts DIN 985
- Centering bushings
Indexing plunger GN 717, type CK
- Plunger pin
Stainless steel AISI 303 - Knob
Plastic (Polyamide PA)
Black, matte finish
Spring plunger GN 615.9, type KN
- Stainless steel AISI 304, ball with friction bearing
- with internal hexagon
- Stainless steel lock nut ISO 4035
RoHS
Accessory
Adjustable Hand Levers GN 911Information
With locking slide units GN 134.7, recurring positions along a square construction tube can be moved to easily and quickly. The required holes for type R or countersinks for type D can be created by the user according to the design instructions or ordered as completely finished construction tubes with locking holes GN 990.1.
For quick clamping without tools, the socket cap screw at the screw location z, can be replaced by the adjustable hand levers GN 911 listed in the table as accessories. Centering bushings at the screw points eliminate the axial play between the top and bottom parts of the locking slide units.
Locking slide units GN 134.7 are delivered with unmounted indexing plunger (type R) or spring plunger (type D). Type G with thread is universally suitable for specific applications.
| How to order |
| ||||||||
GN 134.7-V40-V40-R-SW |
-
-
