with Full Extension, Load Capacity up to 2120 N

GN 1430 Telescopic Slides

Type

E	With rubber stop, locking device in back

Identification no.

2	Fastening using countersunk holes

Show filter

l₁	l₂ +4/-4 Stroke	l₃	F_s per pair in N at 10,000 cycles	at 100,000 cycles

400	435	835	1570	970
450	485	935	1600	1030
500	545	1045	1690	1150
550	595	1145	1870	1160
600	650	1250	1890	1180
700	750	1450	1870	1370
800	850	1650	2120	1470
900	950	1850	1920	1250
1000	1050	2050	1790	1080
1200	1250	2450	1630	950

Filter combination produces no result.

Specification

Slide profile
Steel, Zinc plated, blue passivatedZB

Bearings
Roller bearing steel, hardened

Ball cage
Steel, zinc plated

Rubber stop
Plastic / Elastomer

Operating temperature -20 °C to 100 °C

Telescopic Slides - Application Video

Mounting holes to GN 1430

Telescopic Slides - Highlights

Telescopic Slides - General Notes and Overview of Types

Telescopic Slides - Mounting and Technical information

Telescopic Slides - Component Options and Fastening Options

RoHS

On request

Other lengths and hole spacing

Other attachment options

With latches, partially with detach function
(back, front, or back-front)

With locking devices (front or back-front)

Other surfaces

With support bracket

Information

Telescopic slides GN 1430 are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l₁ (full extension). The rubber stops of type E dampen the impact of the slide in the two end positions and takes on the locking function of the back stop position. This feature is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.

The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.