Stainless Steel Mesh
GN 7403 Breather Strainers
| d1 Thread | Thread | Mesh size in µm | d2 | d3 | l1 | l2 | s | |
|---|---|---|---|---|---|---|---|---|
| G 1/2 | M 20 x 1,5 | 100 | 500 | 26 | 10 | 8,5 | 7,5 | 23 |
| G 3/4 | M 26 x 1,5 | 100 | 500 | 32 | 14 | 9 | 8 | 30 |
| G 1 | M 33 x 1,5 | 100 | 500 | 40 | 20 | 11 | 8,5 | 36 |
Specification
AluminumAL
Strainer
Stainless steel mesh
AISI 304
Strainer bezel
Plastic (Polyamide PA)
- Glass fiber reinforced
- Temperature resistant up to 100 °C
Sealing / O-ring
Rubber NBR (Perbunan®)
RoHS
Accessory
Mounting Nuts GN 7430On request
Other mesh size
Other material for the strainer
Information
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the enclosure and the outside.
Any dirt and dust particles carried by the medium (usually gas) are prevented from exiting depending on the mesh size. This protects the insides of sensitive devices and machinery parts from dirt and pollution and also protects the environment from any exiting dust.
The outside diameter of the enclosure with the recessed hexagon matches the bolt mounting holes for DIN 3852 threaded pipe connectors.
The sealing ring is embedded in a radial and plane-sided recess which makes the seal captive and prevents it from being squeezed out during tightening.
Assembly instruction:
For mounting on walls of less than 4 mm thickness please use a mounting nuts GN 7430.
| How to order |
| ||||||
GN 7403-AL-G1/2-100 |
-
-
