GN 5860 Load Rings

Show filter

d₁	Length l	e	h₁	h₂	h₃	h₄	k₁	k₂	k₃	k₄	A/F	Tightening torque in Nm	Nominal Load in t

M 8	13	30	84	76	31	45	8	45	29	44	27	10	0,30
M 10	17	34	86	78	31	47	8	45	29	44	30	10	0,45
M 12	21	42	117	107	49	58	10	55	35	65	36	10	0,60
M 16	25	48	127	114	46	68	13	64	38	65	41	30	1,30
M 20	33	62	150	137	54	83	13	61	35	77	55	70	2,00
M 24	40	81	191	173	66	107	18	76	40	94	70	150	3,50
M 30	50	99	243	221	90	131	22	94	50	126	85	225	5,00

Filter combination produces no result.

Specification

Chain ring
Steel 1.6540

High-tensile tempered
100% electro magnetic tensile tested
Powder coated, pink

Eye ring
Steel 1.6541

Forged
High-tensile tempered
100% electro magnetic tensile tested
Powder coated, pink

Bearing case
Steel 1.6541

Forged
High-tensile tempered
100% electro magnetic tensile tested
Zinc plated, blue passivated

Screw
Steel
Property strength class 10.9
Finish: Delta Tone

Strength Values of Screws

RoHS

On request

Other screw lengths

Information

Load rings GN 5860 rotate running in ball bearings. The freely rotating ring allows the bolts to hold loads in any tensile direction.

The rated load-bearing capacity is shown clearly on the load ring. It is valid for the most unfavourable case in terms of the types of load listed opposite. Load rings GN 5860 comply with Machine Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

The operating instruction contains further guidelines and is included with every load ring (see also at www.ganternorm.com/en/service).