Stainless Steel, with 4 Bores
GN 146.5 Flanged Connector Clamps
Type
| A | Without seals |
| B | With seals |
Identification no.
| 4 | With stainless steel cap nut DIN 917 |
| d1 Bore | b | d2 | d3 | k Clamping length | l1 | m | t | x1 | x2 | y1 | y2 | z Screw location | Accessory recom. hand lever GN 911.3 for z l2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B 30 | 22 | 6,5 | 37 | 40 | 65 | 30 | 7 | 52 | 35 | 70 | 53 | M 8 | 63 | 78 |
| B 50 | 30 | 10,7 | 60 | 65 | 98,5 | 50 | 9 | 92 | 62 | 128 | 98 | M 10 | 78 | 92 |
Filter combination produces no result.
Specification
Stainless steel AISI CF-8
Matte shot-blasted
Carriage bolts DIN 603
Stainless steel
Cap nuts DIN 917 / washers
Stainless steel
Seals
RoHS
Matte shot-blasted
Carriage bolts DIN 603
Stainless steel
Cap nuts DIN 917 / washers
Stainless steel
Seals
- Sealing disks
Plastic (Polyacetal POM) - Spacer ring
Silicone, 40 ... 60 Shore A
RoHS
Accessory
Adjustable Hand Levers GN 911.3Information
The clamping bores of GN 146.5 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
At the screw location z, carriage bolt and cap nut reduce the bore cross-section for clamping. Type B is equipped with seals at the screw location.
For clamping without tools, the cap nut can be replaced by an adjustable hand lever GN 911.3 listed in the table as accessory.
| How to order |
| ||||||
GN 146.5-B30-B-4 |
This could also be interesting...
GN 911.3
Adjustable Stainless Steel Hand Levers, with Threaded Stud, for Tube Clamp Connectors / Linear Actuator Connectors
GN 146.3
Flanged Connector Clamps, Aluminum, with 2 Holes
GN 146.6
Stainless Steel Flanged Connector Clamps, with 2 Bores
GN 145
Stainless Steel Flanged Connector Clamps, with 2 Mounting Holes
GN 146
Flanged Connector Clamps, Aluminum, with 4 Holes
RoHS compliant:
-
-
Weight:
-
-
PDF not available
