Hygienic Design, with Mounting Holes, Certified Acc. EHEDG, 3-A SSI and DGUV Test

GN 20 Stainless Steel Leveling Feet

Stainless Steel Leveling Feet GN 20 thumbnail

Stainless Steel Leveling Feet GN 20 sketch

Type

B	With mounting holes

Show filter

d₁	d₂	l₁		d₃	d₄	l₂	l₃	k	A/F1	A/F2	Static load in kN (see information)

80	M 12	175	225	25	9,5	14	35	55,5	17	19	16
80	M 16	175	225	28	9,5	19	35	55,5	18	22	30
80	M 20	185	235	32	9,5	24	35	55,5	24	27	47
80	M 24	185	235	36	9,5	29	35	55,5	24	30	67
100	M 16	175	225	28	12	19	35	69	18	22	30
100	M 20	185	235	32	12	24	35	69	24	27	47
100	M 24	185	235	36	12	29	35	69	24	30	67
120	M 16	175	225	28	12	19	35	89	18	22	30
120	M 20	185	235	32	12	24	35	89	24	27	47
120	M 24	185	235	36	12	29	35	89	24	30	67

Filter combination produces no result.

Specification

Spindle, adjustable sleeve, foot plate

Stainless steel AISI 304
Turned

Seals, blue, FDA compliant

Sealing ring
NBR, hardness 70 ±5 Shore A
Wiper
TPU, hardness 95 ±5 Shore A
Joint sealing ring
H-NBR, hardness 85 ±5 Shore A
Bottom seal
Silicone, hardness 85 ±5 Shore A

https://www.youtube.com/watch?v=TW7KStiMhE0

Brochure on Hygienic Design

Operation instruction GN 20 type B

Mounting example

EHEDG Certification

3-A Certificate

GN 20_DGUV Test Zertifikat.pdf

Elastomer Characteristics

Stainless Steel Characteristics

RoHS

Accessory

Stainless Steel Cover Sleeves GN 20.1

Stainless Steel Screws GN 1580

Stainless Steel Screws GN 1581

Information

Stainless steel leveling feet GN 20 with fixing holes are certified according to EHEDG, 3-A Sanitary Standards, Inc. and DGUV Test guidelines and are therefore ideal for use in hygienic areas.

The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings, e.g. GN 1580 screws and nuts, and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.

The high quality finish prevents adherence of dirt and facilitates cleaning.

The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.