with Inside Traversal Distance
GN 1490 Stainless Steel Linear Guide Rail Systems
Type
| A3 | with one cam roller carriage with 3 rollers |
| A5 | with one cam roller carriage with 5 rollers |
| B3 | with two cam roller carriages with 3 rollers |
| B5 | with two cam roller carriages with 5 rollers |
Identification no.
| 0 | without end stop |
| 1 | with one end stop |
| 2 | with two end stops |
| h1 | l1 ±1 | b | h2 | l2 cam roller carriage 3 rollers | 5 rollers | FR per cam roller carriage in N 3 rollers | 5 rollers | FA per cam roller carriage in N 3 rollers | 5 rollers | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 29 | 394 | 474 | 554 | 634 | 714 | 794 | 29 | 23 | 92 | 158 | 425 | 650 | 175 | 350 |
| 29 | 874 | 954 | 1034 | 1194 | 1434 | - | 29 | 23 | 92 | 158 | 425 | 650 | 175 | 350 |
| 37 | 394 | 474 | 554 | 634 | 714 | 794 | 37 | 30 | 92 | 158 | 800 | 1150 | 200 | 400 |
| 37 | 874 | 954 | 1034 | 1194 | 1434 | - | 37 | 30 | 92 | 158 | 800 | 1150 | 200 | 400 |
Specification
Stainless steelNI AISI 430, plain
Cam roller carriage
- Base body
Stainless steel AISI 304 - Roller
ball-bearing, 2RS
Stainless steel AISI 440C - Roller bearing grease
FDA compliant, class H1
permanent lubrication
End stop
- Stainless steel AISI 304
- Rubber stop (TPU), hardness ≈ 80 Shore A
Operating temperature -20 °C to 100 °C
Mounting holes, fastening screws / Lubrication and maintenance
Mounting and technical information GN 1490
Operation instruction GN 1490
Stainless Steel Characteristics
RoHS
On request
Other hole spacings / finish
Information
Stainless steel linear guide rail systems GN 1490 are generally installed in pairs, with a horizontal alignment, either vertically (as shown) or perpendicularly. They are used where simple, linear movements must be executed, such as in automation or in vehicle or machine engineering.
Optimal travel properties combined with low maintenance requirements can be achieved in connection with cam roller carriages matched to the guide rails without any play. The system is ready for use immediately after insertion of the cam roller carriages.
The linear guide rail systems consist of a guide rail, one or two cam roller carriages and the selected number of end stops. The parts are delivered unassembled. The guide rail can be installed on either the left or right side of the application. During installation of the cam roller carriages, the direction in which the load is received (marking notch) must be taken into account. The lubrication and maintenance instructions must be followed.
| How to order |
| ||||||||||
GN 1490-29-1034-B3-2-NI |
-
-
