for Lifting Pins GN 1130
GN 1132 Stainless Steel Holding Bushings
Type
| A | With external hexagon |
| d1 | l1 Nominal length | d2 | d3 | d4 +0,3 | l2 | l3 | s | Tightening torque in Nm |
|---|---|---|---|---|---|---|---|---|
| 8 | 10 | M 16 x 1,5 | 24 | 9,8 | 27,5 | 20 | 19 | 90 |
| 8 | 25 | M 16 | 24 | 9,8 | 37,5 | 25 | 19 | 75 |
| 10 | 15 | M 20 x 1,5 | 28 | 12,2 | 35,5 | 24 | 24 | 145 |
| 10 | 35 | M 20 | 28 | 12,2 | 46 | 29 | 24 | 130 |
| 12 | 15 | M 24 x 1,5 | 32 | 14,7 | 35,5 | 24 | 27 | 220 |
| 12 | 35 | M 24 | 32 | 14,7 | 48,5 | 36 | 27 | 200 |
| 16 | 25 | M 30 x 2 | 39 | 19,2 | 44 | 29 | 30 | 440 |
| 16 | 50 | M 30 | 39 | 19,2 | 66 | 44 | 30 | 400 |
| 20 | 50 | M 36 x 2 | 43 | 26 | 70 | 55 | 36 | 440 |
Filter combination produces no result.
Specification
On request
Other threads d2
Information
Stainless steel holding bushings GN 1132 are used in connection with lifting pins GN 1130 . The length l1 of the holding bushing should be equal to length l1 of the lifting pin in order to reach the load specification given in the table for GN 1130 at plug-in length x.
Stainless steel holding bushings are intended to remain permanently at the workpiece, creating a place-saving alternative to load rings or similar.
| How to order |
| ||||||||
GN 1132-10-35-M20-A |
This could also be interesting...
RoHS compliant:
-
-
Weight:
-
-
PDF not available
